微桥科技产品新闻动态管理发布系统 现在是
首页 ·公司动态 ·产品动态 ·原厂动态 ·行业动态 ·技术资料 ·LED驱动 ·DC-DC ·AC-DC ·MOSFET ·音频功放 ·电池管理 ·霍尔及马达驱动 ·其他 ·联系我们

当前位置:首页>>产品动态>> PT6160-3~7节锂电池充放电管理IC(带I2C接口,电池平衡)   双击自动滚屏
发布者:微桥 发布时间:2010/11/25 阅读:17018次    关键字: PT6160 锂电池充电
PT6160-3~7节锂电池充放电管理IC(带I2C接口,电池平衡)


PT6160-Multi-cell Battery Management Front End with I2C Interface 3~7节锂电池充放电管理系统 PDF文档下载

PT6160_3-7节锂电池充电应用方案 PDF文档下载

PT6160是一个高度集成的,用数字设备可编程、充电/放电管理IC,可以为3~7节锂电或磷酸亚铁锂电池充放电管理,用于便携式的电动工具或其他多电池系统。
PT6160电路可以带来一个可编程的分流电流高达200mA,而不需要外部电晶体。
PT6160由微处理器通过可编程接口I2C接口。输入电压为6~30V。QFN-24封装。(微桥整理)

 

PT6160-3~7节锂电池充放电管理IC(带I2C接口,电池平衡)

申请样品/demo
请发邮件到sales@micro-bridge.com(注明详细联络方式)
或者在线申请http://www.micro-bridge.com/aloform/

http://www.micro-bridge.com
微桥科技 QQ:4221620
E-mail:sales@micro-bridge.com
Tel:0755-83991588

GENERAL DESCRIPTION
    The PT6160 is a highly integrated, digitally programmable, charging/discharging management IC for 3 to 7 serially connected Li-Ion or LiFePO4, batteries used in portable electrical tools or other multi-cell battery powered systems. It contains a multi-channel 10-bit ADC digitizing battery voltages, environment temperature, and battery discharge current.
    The converted data is transferred to MCU via I2C interface and is used for battery balancing and safety protections against battery over-voltage, under-voltage, discharging over current, and over temperature. The integrated battery balance circuitry could deliver a programmable shunt current as high as 200mA without the need of external transistors. The PT6160 buffers both DC and PWM (Pulse Width Modulation) MOSFET control signals generated from MCU to drive an electrical motor.
    Key parameters in the PT6160 are programmable by a microprocessor through an I2C interfacing port, which features customers to achieve flexible and optimal multi-cell Li-ion/LiFePO4 battery charging/discharging progress control and safety protection. The package is QFN-24.

FEATURES
Charging Control
􀂂 3~7 Li-ion or LiFePO4 battery cells system
􀂂 Cell balancing with programmable shunt currents up to 200mA
􀂂 Accurately sensing battery cell voltages and temperature through a 10-bit ADC.
􀂂 MCU controlled protection cutoff voltages.
Discharging
􀂂 Programmable discharge over-current or short-circuit protection thresholds
􀂂 MCU controlled battery under-voltage protection thresholds
􀂂 10~15V PWM or DC MOSFET gate driving voltages
􀂂 200mA maximum MOSFET gate driving current
􀂂 Load protection to prevent discharging on short-circuit or light load between two terminals connected to the motor
MCU Interfacing
􀂂 A 10-bit ADC samples up to 7 individual cell voltages, environmental temperature, and discharge current.
􀂂 ADC sampling time <20ms through all channels
􀂂 ADC fail bit indicates overflow
􀂂 100 kHz I2C communication port
􀂂 2 seconds watchdog function for MUC.
􀂂 5~3.2V supply voltage to MCU
Other Protections
􀂂 6V under voltage lockout voltage (UVLO)
􀂂 Protected from <1.0ms negation glitch toward ground generated from battery pack
􀂂 Internal over temperature shutdown (TSD)

本文共分 1

  • 上篇文章华润矽威锂电保护管理IC
  • 下篇文章SS54(5A/40V),SS56(5A/60V),肖特基二极管
  •  
     

    版权所有 Copyright Micro Bridge Technology Co.,Ltd. All rights reserved.粤ICP备05065909号