微桥科技产品新闻动态管理发布系统 现在是
首页 ·公司动态 ·产品动态 ·原厂动态 ·行业动态 ·技术资料 ·LED驱动 ·DC-DC ·AC-DC ·MOSFET ·音频功放 ·电池管理 ·霍尔及马达驱动 ·其他 ·联系我们

当前位置:首页>>其他>>Load Switch负载开关 >>EUP3511-1A Current Limited Load Switch   双击自动滚屏
发布者:来自网络 发布时间:2014/7/23 阅读:6390次    关键字: DC-DC
EUP3511-1A Current Limited Load Switch


EUP3511-1A Current Limited Load Switch DataSheet 

DESCRIPTION

      The EUP3511 are Current Limited P-channel MOSFET power switches designed for high-side load switching applications. The internal current-limiting circuit protects the input supply against large output short circuit current which may cause the supply to fall out of regulation. The current limit threshold is programmed with an external resistor from SET Pin to ground. The quiescent supply current is typically 8μA, making the device ideal for portable battery-operated equipment. In shutdown mode, the supply current decreases to less than 0.1μA.
Additional features include thermal shutdown to prevent catastrophic switch failure from high current loads, under-voltage lockout (UVLO) to ensure that the device remains off unless there is a valid input voltage present.
The EUP3511 are available in 5 pin SOT-23 packages.

FEATURES

•  2.4V to 5.5V Input voltage range
•  Programmable Over Current Threshold
•  Fast Transient Response:
•  Low Quiescent Current
    - 8μA Normal Operation
    - 1μA Max in Shutdown
•  115mΩ typical RDS(ON)
•  Under-Voltage Lockout
•  Thermal Shutdown
•  4kV ESD Protection
•  Available in SOT23-5 Package
•  RoHS Compliant and 100% Lead(Pb)-Free

APPLICATIONS

•  Peripheral ports
•  Notebook computers
•  Personal communication devices
•  Hot swap supplies

本文共分 1

  • 上篇文章EUP3510-Current Limited High Side Load Switch
  • 下篇文章EUP3545A-USB Power-Distribution Switch
  •  
     

    版权所有 Copyright Micro Bridge Technology Co.,Ltd. All rights reserved.粤ICP备05065909号