EMP6403-Dual,High-PSRR,Low-Noise,Low-Dropout,300mA CMOS Linear Regulator DataSheet
The EMP6403 series is a family of dual-channel CMOS linear regulators featuring ultra-high power supply rejection ratio (PSRR), low output voltage noise, low dropout voltage, low quiescent current and fast transient response. It guarantees delivery of 300mA output current per regulator, and supports preset output voltages ranging from 1.2V to 3.3V with 0.1V increment (except for 1.85V and 2.85V).
The EMP6403 is well suited for portable battery-powered application which requires high efficiency, low noise and small board space. With 150mV low dropout voltage at 300mA output current, EMP6403 sustains high PSRR at very low input voltage which is common in battery-powered application. The EMP6403 also features 120μVRMS low output voltage noise without the presence of a noise bypass capacitor, which fits the application where noise and board space are both
concerned. Each regulator in the EMP6403 can be turned off independently, further prolonging the battery life. Internally build-in thermal protection and over-current protection provide additional safety for the end use.
The EMP6403 is available in miniature 6-pin SOT-23-6 packages.
Miniature SOT-23-6 packages
300mA guaranteed output current
72dB typical PSRR at 1kHz (60dB typical at 10KHz)
120μVRMS output voltage noise (10Hz to 100kHz)
150mV typical dropout at 300mA
150μA typical quiescent current
Less than 1μA typical shutdown mode
Auto-discharge during chip disable
Fast line and load transient response
30μs typical turn-on time
2.5V to 5.5V input range
Stable with small ceramic output capacitors
Over temperature and over current protection
±2% output voltage tolerance
DSP core power
Portable information appliances