微桥科技产品新闻动态管理发布系统 现在是
首页 ·公司动态 ·产品动态 ·原厂动态 ·行业动态 ·技术资料 ·LED驱动 ·DC-DC ·AC-DC ·MOSFET ·音频功放 ·电池管理 ·霍尔及马达驱动 ·其他 ·联系我们

当前位置:首页>>霍尔及马达驱动>>Axelite亚瑟莱特 >>AX8113-Ultra-sensitive Hall Effect Switch   双击自动滚屏
发布者:微桥 发布时间:2013/1/24 阅读:7553次    关键字: HALL
AX8113-Ultra-sensitive Hall Effect Switch


AX8113-MicroPower,Ultra-sensitive Hall Effect Switch DataSheet

GENERAL DESCRIPTION
    AX8113 is a Hall Effect sensor device with Dual output driver, mainly designed for
battery–operation, hand-held equipment (such as Cellular and Cordless Phone, PDA). ForAX8113, the total operation power is down to 10uW in the 1.8V supply. Either north or South Pole of sufficient strength will turn the output on. The output will be turned off  under no magnetic field.
    While the magnetic flux density (B) is larger than operate point BOPS (South Pole), the OUT1 will be turned on (low), the OUT1 is held until B is lower than release point BRPS (South Pole), then turned off (high).
    While the magnetic flux density (B) is larger than operate point BOPN (North Pole), the OUT2 will be turned on (low), the output is held until B is lower than release point BRPN (North Pole), then turned off (high).

FEATURES
- Micro Power Operation for Battery Applications
- 1.65V to 3.30V battery operation
- Chopper Stabilized Technology
- Operation with South Pole (OUT1) or North Pole (OUT2)
- Good RF noise immunity
- High sensitivity and high stability of the magnetic switching points
- 5-pin Thin TSOT-23 Package

本文共分 1

  • 上篇文章AX8112-Ultra-sensitive Hall Effect Switch
  • 下篇文章微桥科技移动电源升压IC
  •  
     

    版权所有 Copyright Micro Bridge Technology Co.,Ltd. All rights reserved.粤ICP备05065909号